System-sensor PDRP-2001 Manual do Utilizador Página 94
- Página / 148
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
94 PDRP-2001 Series Manual — P/N 53043:E1 2/28/2011
Operating Instructions Read Status
The following screens will be displayed:
4.15.1 FACP Configuration
Pressing 1 while viewing Read Status Screen #1 will display the type of configuration programmed
into the FACP (refer to “FACP CONFIG (Application Templates)” on page 51). As an example, if
Template 7 was programmed as the FACP configuration, the following screen will be displayed:
4.15.2 Input Zones
Pressing 2 while viewing Read Status Screen #1 will cause the following screens to be displayed:
Pressing the down arrow key will allow the selection of Zones 4-6.
READ STATUS
1=FACP CONFIG
2=INPUT ZONES
3=OUTPUT CIRCUITS
READ STATUS
1=CROSS INPUT ZONES
2=ON-BOARD RELAYS
3=SYSTEM SETTINGS
Read Status Screen #1
Read Status Screen #3
READ STATUS
1=TIMERS
2=DAYLIGHT SAVINGS
3=HISTORY
Read Status Screen #2
READ STATUS
1=PRINT
2=ANN-BUS
Read Status Screen #4
READ FACP CONFIG
TEMPLATE 7
SINGLE HAZARD
3 ZONE
READ INPUT ZONES
1=ZONE 1
2=ZONE 2
3=ZONE 3
- Fire Alarm System Limitations 2
- Installation Precautions 3
- FCC Warning 3
- Software Downloads 4
- Documentation Feedback 4
- Table of Contents 5
- Trouble* 10
- Supervisory* 10
- FIRE ALARM ANNUNCIATOR 11
- 1.1 Product Features 12
- 1.2 Specifications 13
- 1.3 Controls and Indicators 16
- 1.4 Components 17
- Section 2: Installation 19
- Installation Backbox Mounting 20
- Backbox Mounting Installation 21
- 2.2 Operating Power 22
- 2.3 Input Circuits 24
- 2.4 Output Circuits 26
- 2.4.3 Relays - Programmable 27
- RP2001cULwire.wmf 28
- Installation 29
- B+ B 30
- Standoffs 31
- 4xtmf.cdr 32
- 2.7 ANN-BUS Devices 33
- 2.7.1 ANN-BUS Wiring 34
- Wiring Configuration 36
- Specifications 37
- Wiring ANN-80 to FACP 38
- ANN-BUS Devices Installation 39
- PRN-6F Printer Installation 40
- ANN-I/O Board Layout 42
- ANN-I/O Connection to FACP 43
- ANN-I/O Module LED Wiring 43
- Mounting/Installation 44
- 2.7.7 ANN-RLY Relay Module 45
- Section 3: Programming 47
- 3.2 Initial Power-up 48
- Programming Screen #1 49
- 3.5 Master Programming Level 50
- 3.5.2 Input Zones 51
- Edit Input Zone Screen #2 52
- Edit Input Zone Screen #3 52
- Zone Type Screen #1 52
- Output Map Screen#1 54
- Output Zone Screen#2 54
- INPUT ZONE # 55
- 1=ADJECTIVE/NOUN 55
- 2=DESCRIPTION 55
- ***************** 55
- INPUT ZONE # 56
- 3.5.3 Output Circuits 57
- Output Screen #1 58
- Output Screen #2 58
- Output Screen #3 58
- NAC Screen #1 58
- Edit Output # Type Screen 58
- Silenceable Screen #1 60
- Silenceable Screen #2 60
- Auto Silence 61
- Silence Inhibited 61
- Coding Screen #1 62
- Coding Screen #2 62
- Coding Screen #3 62
- Coding Screen #4 62
- 3.5.4 Cross Input Zones 64
- 3.5.5 On-Board Relays 65
- 3.5.6 System Setup 66
- Waterflow Delay 68
- System Setup Screen #1 69
- Select Banner Screen 69
- User Defined Banner Screen #1 69
- Timer Screen #2 69
- AC Loss Delay Screen #1 69
- Time-Date 70
- Date Screen 71
- Time & Date Screen #2 71
- Daylight Savings Screen #1 71
- Daylight Savings Screen #2 71
- SYSTEM SETUP 72
- 3.5.7 ANN-BUS 73
- ANN-BUS Modules 74
- Auto-Configure 75
- ANN-S/PG Options 75
- ANN-I/O LED Zone Assignments 76
- ANN-80 Options 77
- PROGRAMMING 78
- ANN-RLY OPTIONS 78
- 1=RELAY 1 IN ZONE 1 78
- 2=RELAY 2 IN ZONE 2 78
- 3=RELAY 3 IN ZONE 3 78
- 3.5.8 History 79
- 3.5.9 Walktest 80
- 3.5.10 Clear Program 81
- 3.5.11 Password Change 81
- 3.6.2 History 83
- 3.6.3 Walktest 84
- 3.6.4 Time-Date 85
- 4.1 Panel Control Buttons 86
- 4.2 Indicators 87
- 4.3 Normal Operation 87
- 4.4 Trouble Operation 88
- 4.5 Alarm Operation 89
- 4.6 Supervisory Operation 90
- 4.7 Disable/Enable Operation 90
- 4.9 2nd-Shot Water Switch 91
- 4.10 Detector Functions 91
- 4.11 Coded NAC Operation 91
- 4.12 Release Stages 92
- 4.13 Special System Timers 92
- 4.14 Walktest 92
- 4.15 Read Status 93
- 4.15.1 FACP Configuration 94
- 4.15.2 Input Zones 94
- 4.15.3 Output Circuits 95
- 4.15.4 Cross Input Zones 96
- 4.15.5 On-Board Relays 96
- 4.15.6 System Settings 97
- 4.15.7 Timers 97
- 4.15.8 Daylight Savings 98
- 4.15.9 History 98
- 4.15.10 Print 98
- 4.15.11 ANN-BUS 99
- 5.1 Overview 100
- 5.3.1 Overview 101
- Current Draw 101
- Operation 104
- Activation 106
- Release Circuits 108
- All Active 120
- 1 2 3 4 5 6 7 125
- Appendix D: FACP with Keltron 131
- E.1 Testing 132
- E.2 Maintenance 133
- Appendix F: Wire Requirements 134
- F.1 NAC Wiring 135
- G.4.1 System Sensor - 24VDC 139
- G.6 Releasing Applications 140
- G.8 Relays (UL Listed) 141
- Numerics 142
- Index D–L 143
- M–P Index 144
- Index R–V 145
- W–Z Index 146
- Warn-HL-08-2009.fm 147
- 3825 Ohio Avenue 148
- St. Charles, IL 60174-5465 148
- 1-800-SENSOR2 148
- Fax: (630) 377-6495 148
- 148
© 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.043 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais